Filter
Top Products
11
1.5 Camera Component Description
1) Reset: To load the factory default configuration press the button, which is inside this
hole, for 3 seconds. Please gently insert a thin, non-metallic device into the hole
to operate the reset button.
2) Control Key: For setting Lens & OSD menu. Press the mini-joystick and hold for 5 seconds to
switch between Lens & Menu setting. When the camera is in Lens mode, turn
the mini-joystick up (c) or down (d) to zoom in/ zoom out. Turn the mini-
joystick left (e) or right (f) to adjust focus.
3) Lens/Menu: Lens LED will turn green when you select the Lens adjustment mode. Menu
LED will turn red when you select the Menu setting mode.
4) Video/GND: for aim and focus access to video at the camera, use the Video Test Cable
supplied to connect to a hand held test monitor (EN220 or similar).
1.6 Related Products
In addition, you may order the following EverFocus products which are recommended for use
with the camera to achieve the best performance:
• EverFocus control keyboard (EKB500)
• Any EverFocus DVR with RS-485 interface for PTZ control
Sunshield
Use a coin or screwdriver
to remove the cover
Controls are inside the cover
Speedy-mount Ring
1
2
4
3
Green: Lens mode
Red: Menu mode