Filter
Top Products
EZN850
32
4.4.2.8.2 COLOR ADJ
Adjust the Color Gain from 0 ~ 15
4.4.2.8.3 SYNC
There are two SYNCHRONIZATION modes: INTERNAL and EXTERNAL
LINE-LOCK. In LINE-LOCK mode, without a synchronous generator, it
synchronizes the video signal between cameras. The Line-Lock synchronization is
only used in the places of 60Hz (NTSC models) or 50Hz (PAL models).
-INT: Internal synchronization
-LL: External line-lock synchronization
=> If you choose “LL”, you can adjust the phase your wish to set. Then click the
SET key. You can adjust the phase you wish to set from 0 to 359.
4.4.2.8.4 MOTION DETECTION
EZN850 enables you to observe movements of objects in 4 different places on the
screen, the message “MOTION DETECTED” appears on the screen when movement
is detected; therefore this helps to improve supervision efficiency. The camera detects
an object’s movement by sensing discrepancy of outline.
1) Please direct the arrow to point to “MOTION DET” by clicking UP (c) or
DOWN (d) key.
2) Select “ON” by clicking LEFT (e) or RIGHT (f) key.
3) Click the SET key.
COLOR GAIN.
> LEVEL |++++++++| 8
SPECIAL
CAMERA ID OFF
> COLOR ADJ. <┘
SYNC. INT
MOTIION DET OFF
PRIVACY OFF
MIRROR OFF
SHARPNESS ON <┘
RESET
RETURN <┘
SPECIAL
CAMERA ID OFF
COLOR ADJ. <┘
> SYNC. LL <┘
MOTIION DET OFF
PRIVACY OFF
MIRROR OFF
SHARPNESS ON <┘
RESET
RETURN <┘
SYNC
> PHASE |++++++++| 0