First Alert P-520 Security Camera User Manual


 
Setting Up the P-520 Camera
Model P-520 User's Manual
4
CONNECTING THE CAMERA TO A VCR/DVR AND TV
1
Connect the 100 ft cable (supplied) to the camera.
2 Connect other end of the cable to the input on the VCR/DVR.
(yellow connector = video in; white connector = audio in)
3 Connect an AV cable (not supplied) from the VCR/DVR to the TV.
4 Connect the power supply cable (supplied) to the camera (red plug). Plug the
adapter into an electric outlet.
Make sure the power adapter is in a dry place.
5 Power on the VCR/DVR and TV.
6 Tune your TV to the correct INPUT (e.g., INPUT1) using your TV’s remote control.
Follow your manufacturer’s instructions to record to your VCR or DVR.
NIGHT VISION
The camera has built-in infrared LEDs to allow you to view up to a distance of 16 ft at
night for 24-hour surveillance. The LEDs automatically activate at night and the picture
viewed turns to a black and white image.
TROUBLESHOOTING
Problem Solution
No picture.
Make sure the camera and TV are plugged in.
Make sure the TV/ VCR/ DVR is tuned to the
correct input channel.
Flickering image.
Move the camera or move any source of bright light
away from the camera.
Image is too light or dark.
Adjust the contrast and brightness on the TV.
Move the camera or move any source of bright light
away from the camera.
A white image appears at night.
The camera's infrared LEDs shine invisible light that
reflects off surfaces such as glass causing white
light.
Place the camera on the other side of windows or
place the lens flush against the surface to improve
night vision.