Filter
Top Products
SETTINGS
Manual color/black and white setting
Connect each cable as indicated below, to set the image to black and
white or color as desired.
•
Color image setting
Connect the
Color
(yellow) and the
White
(ground) cables.
•
Black and white setting
Connect the
B/W
(purple) and the
White
(ground) cables.
Day/night cable
Image
Color B/W
OFF OFF Auto
OFF ON Black and white
ON OFF color
ON ON Auto
ON
: Close
OFF
: Open
Notes:
• The maximum length of cable for CONTROL terminal is 600 m
(AWG 24).
• During optical filter switching, even if the manual switching
operation is done, you cannot determine if the image is black and
white or color. Manual switching will have to be done one more
time.
Lens iris adjustment
You will need to set the
LEVEL
(VR121) volume when shooting in the
conditions described below.
Counterclockwise:
To decrease the contrast
Clockwise:
To increase the contrast
• If shooting simultaneously in a dark room and through a bright
window.
• If the subject background is extremely bright or dark.
• If the brightness of the picture on the monitor is not correct.
GND
(White)
Color
(Yellow)
B/W
(Purple)
VR121
L5AK4/US, L5AL4/US GB 2003, 6, 6
10
English