Fisher VPC-C6 Camcorder User Manual


 
111 English
OPERATION SOUNDS
3 Select CHANGE SETTINGS, and
press the SET button.
h The screen to change the settings
appears.
4 Toggle the SET button up or down
to select the desired setting, and
press the SET button.
h The screen to select operation
sounds appears.
<If TURN ON/OFF or AUDIO GUIDE is selected>
h The respective screen to enable or disable the sound appears.
h Toggle the SET button up or down to select the desired setting,
and press the SET button.
ON: Activates the sound.
OFF: Deactivates the sound.
<If SHUTTER or KEY SW is selected>
h The screen to select the operation sounds appears.
h Select from 8 different sounds (A to H).
h You can press the still image shooting button to preview the
selected operation sound.
h If OFF is selected, no sound is produced.
h Toggle the SET button up or down to select the desired setting,
and press the SET button.
<If OPERATION VOL was selected>
h The screen to select the volume for the operation sounds appears.
h You can select an operation sound volume from 1 (minimum) to 7
(maximum).
h Toggle the SET button up or down to select the volume, and press
the SET button.
5 Select EXIT, and press the SET button.
h The operation sound settings are completed.
HINT
iIf you keep the MENU button pressed and turn on the power, the screen to
turn the operation sounds ON/OFF appears at once. You may find this a
convenient procedure to disable the operation sounds in places you do not
want them to be audible.
ON
ON
OPERATION BEEP
TURN ON/OFF
SHUTTER
KEY SW
AUDIO GUIDE
EXIT
OPERATION VOL