Fisher VPC-C6 Camcorder User Manual


 
English 22
POWER FOR THE CAMERA
The supplied AC adaptor is used not only as the cameras AC adaptor, but
also to charge the battery installed in the camera.
Using the battery pack
At the time of purchase, the battery pack is not charged. The battery pack
must be charged before it can be used in the camera. Also, if the battery
power becomes depleted when the camera is being used (see CHECKING
THE REMAINING BATTERY PACK CHARGE on page 132), it should be
recharged as soon as possible.
1 Install the battery pack in the camera, and attach the cable adaptor
to the docking station terminal on the bottom of the camera.
2 Turn the camera off, and connect the AC adaptor to the DC IN socket
of the cable adaptor.
h Charging begins when the AC adaptor is connected. However, the
camera does not charge when it is set to the shooting mode or PC
camera mode.
h The cameras multi-indicator lights red during charging.
h Charging will take approximately 90 minutes.
h The multi-indicator will turn off when the battery pack is fully charged.