Filter
Top Products
Problem Cause & Solution P.
A part of the
picture is
missing.
The lens was blocked by a finger or the
hand-strap.
24
⇒Hold the camera correctly, and make sure the
lens is not obstructed.
The picture was taken at close range.
41
⇒When the subject is close to the camera, use
the LCD monitor to confirm the composition of
the picture.
No image ([?]
is displayed.)
This may happen when trying to play back
images on a card recorded with a different digital
camera.
31
32
33
⇒Play back pictures from a card recorded using
this camera.
An image
number seems
to be missing in
the 9-multiple
display
The image with the number was erased.
—
⇒This is not a malfunction.
[NO IMAGE]
appears.
There is no image for the selected mode. 29
53
⇒Select a playback mode for which images exist.
Vertical stripes
are present in
the image.
When sequential shots or video clips are taken of
a bright subject, vertical stripes may occur on the
LCD monitor and recorded image.
—
⇒
This is not a malfunction.
[MEMORY
FULL] appears.
There is not enough available internal memory or
memory on the card.
53
55
[CARD FULL]
appears.
⇒Erase unnecessary images. When copying a
card, erase unnecessary images on the card
you wish to copy data to.
⇒
Replace the card. 17
[PROTECTED]
appears and
images can’t be
erased.
Images are protected.
51
⇒Remove the protection.
Some images
can’t be erased.
Viewing imagesOther
TROUBLESHOOTING
75
English