Fisher VPC-C6EX Camcorder User Manual


 
English 136
<Charging the battery pack>
iTurn the camera off or close the monitor unit before setting the camera in
the docking station.
iCharging begins when the camera is set in the docking station.
iDuring charging, the docking station’s CHARGE indicator and the
camera’s multi-indicator are lit red.
iIf the docking station’s CHARGE indicator flashes red, it indicates that the
battery pack is defective or that the camera is not correctly set in the
docking station. In this case, please confirm the condition of the battery
pack and the position of the camera.
* The battery pack can be charged during playback, but not during
shooting.
iWhen the battery pack is completely charged, the docking station’s
CHARGE indicator and the camera’s multi-indicator turn off.
iCharging will take approximately 90 minutes.
<Connecting to a computer>
iTurn the camera on and open the monitor unit before connecting the
camera to a computer.
iThe camera can be used as an external drive of the computer or as a PC
camera.
When using the camera as the computer’s external drive
(See page 10 in the Software Pack Instruction Manual.)
When using the camera as a PC camera
(See page 25 in the Software Pack Instruction Manual.)
<Connecting to a TV>
iTurn the camera on and open the monitor unit before connecting the
camera to a TV (page 137).
<Connecting to a printer>
iTurn the camera on and open the monitor unit before connecting the
camera to a printer.
iBy connecting the camera to a printer, you can print the still images from
the card installed in the camera (page 145).
CAUTION
Note concerning using the camera and docking station
iThe supplied PDS-C6 docking station is for use only with VPC-C6 (VPC-
C6EX, VPC-C6EXE, VPC-C6E, VPC-C6) camera models.
iNote that if a VPC-C5 (VPC-C5EX, VPC-C5E, VPC-C5, VPC-C5GX) cam-
era model is set in the docking station for this camera (PDS-C6), or if a
VPC-C6 camera model is set in the docking station for a VPC-C5 camera
model (PDS-C5), it will not operate correctly.