Filter
Top Products
1
English
Loading your camcorder into the Flip Video™ Underwater Case
IMPORTANT
Before using the Flip Video™ Underwater Case, make sure that it is completely dry and clean. A single
grain of sand or strand of hair can break the seal, resulting in leaks and possible damage to your
camcorder. Use a clean, soft, lint-free cloth to dry the case.
1
Open the Flip Video™ Underwater Case
by lifting the safety latch and turning the
locking knob counterclockwise.
2
Place camcorder in underwater case
bottom end first and align the front
of the camcorder with the lens of the
case. Camcorder will fit snugly.
3
Close the underwater case.
Turn the locking knob clockwise
until the yellow lines on the knob
and back of case line up. Then,
press the safety latch down flat
into locked position.
3
1
2