Filter
Top Products
FireStore
1.3 Loop Mode Update
It is now possible to identify different loop and play modes when FireStore is in STOP mode.
To enter loop playback mode when FireStore is stopped, hold down the
(SHIFT/ALT) button for two seconds (the button will flash once in this mode).
Then press the (STOP) button and you will be able to cycle between the following
loop modes:
NORMAL PLAY
In this mode, FireStore will play the selected clip and pause at the end.
LOOP CLIP
In this mode, FireStore will loop the selected clip continually.
LOOP ALL
In this mode, FireStore will loop all the clips on the attached disk drive(s) continuously, in order.
PLAY ALL
In this mode, FireStore will play through all the clips on the attached disk drive(s) sequentially
then pause at the end.
PAGE 5