Filter
Top Products
38
Printed pictures
1 When shooting a picture, hold your camera cor-
rectly so that your finger is not on the AF windows.
2 Compose the picture in the AF frame and shoot,
or shoot using AF Lock.
3 Clean the lens.
4 Hold the camera firmly and press the shutter re-
lease button gently. Use a tripod for slow shutter
speeds.
5 Select a mode other than
mode.
1 Shoot within specified coverage distance of elec-
tronic flash.
2 Do not cover the flash with your finger.
3 Turn on the back light compensation flash mode
and press the shutter release button.
●
Set date and time after replacing battery.
1 Select a date mode other than “- - - - - -” before
taking pictures.
2 Try to arrange that there is nothing light-colored
where the date appears.
19
24
39
19
29
22
19
32
9
12
11
1 Was your finger on the AF windows
when shooting?
2 Did you aim the subject properly?
3 Is the lens dirty?
4 Is the camera moving?
5 You selected
mode when shoot-
ing at a close distance.
1
Subject was too far from the camera
for flash photography in a dark place.
2 Was your finger over the flash?
3 Was the subject backlit from being
taken next to a window, etc.?
●
You didn’t set correct date and time
after replacing battery.
1 Wasn’t “- - - - - -” selected before tak-
ing pictures?
2 Is there something light-colored
(white, yellow, orange) where the date
appears?
Picture is not sharp.
Picture is too dark.
Printed date/time is in-
correct.
The date is not printed
on the front.
Problems Possible Causes Solutions Page