Filter
Top Products
22
●
Cautions Concerning the Mid-roll Change Function
✻ When a cartridge that has been removed in mid-roll (j is dis-
played) is reloaded into the camera, if “B” blinks in the
Exposure Counter, reload the cartridge once more, avoiding
the following locations.
• Anywhere near a drier, fan, vacuum cleaner, etc., which has
a rotating motor.
• Near an active TV or personal computer display.
✻ If a cartridge is removed in mid-roll j and then loaded into a
camera which does not have the MRC function, the cartridge
will be set to exposed k and can no longer be used.
✻ A cartridge removed in mid-roll k from a camera which does
not have the MRC function cannot be used even if loaded
into this camera.
✻ If a cartridge is removed in mid-roll j and sent to the proces-
sor, all frames on the entire roll will be developed. Expose all
frames on the roll before sending the cartridge to the proces-
sor for development.
✻ Mid-Roll change of cartridge is guaranteed only among our
FOTONEX/ENDEAVOR series and nexia series of cameras
with MRC functions. If a cartridge exposed with another
make of camera with an MRC function is used, operation
may not be normal.