FujiFilm 3228 Camera Lens User Manual


 
EN-4
ENGLISH
Before Using This Product
Some lens features are not available with older
versions of the camera  rmware. Be sure to up-
date the camera  rmware to the latest version.
Instructions on viewing the camera  rmware
version and updating camera  rmware are
available from the following website:
http://www.fujifilm.com/support/digital_cameras/
software/#firmware
If you do not have access to a computer, sup-
port is available from the local distributor
listed in the “FUJIFILM Worldwide Network”
material provided with your camera.
Product Care
• When using a lens hood, do not pick up or
hold the camera using only the hood.
• Keep the lens signal contacts clean.
• Use a blower to remove dust and lint from
the lens surfaces. To remove smudges and
ngerprints, apply a small amount of ethanol
or lens cleaner to a soft, clean cotton cloth or
lens-cleaning tissue and clean from the cen-
ter outwards using a circular motion, taking
care not to leave smears or touch the glass
with your  ngers.
• Never use organic solvents such as paint
thinner or benzene to clean the lens.
Attach the front and rear caps when the lens
is not in use.
• If the lens will not be used for an extended pe-
riod, store it in a cool, dry location to prevent
mold and rust. Do not store in direct sunlight
or with naphtha or camphor moth balls.
• Keep the lens dry. Rusting of the internal
mechanism can cause irreparable damage.
• Leaving the lens in extremely hot locations
could cause damage or warping.