FujiFilm AF3-151E Film Camera User Manual


 
– 4 –
FUJIFILM PRODUCT INFORMATION BULLETIN • FUJICOLOR SUPERIA X-TRA 400
[
CH
]
10. TECHNOLOGIES INCORPORATED
IN NEW SUPERIA X-TRA 400
10-1 Super Fine-
ΣΣ
ΣΣ
Σ (Sigma) Grain Technology
By incorporating the Super Fine-Σ (Sigma) grain, a
further advance over the Fine-Σ (Sigma) grain intro-
duced in SUPERIA X-TRA 800 film, this film realizes
very high level of grain quality among ISO 400-class
films.
To achieve the high sensitivity and small volume of
the Super Fine-Σ (Sigma) grain, uniform, thin-crystal
technology was used to produce crystals with ap-
proximately half the thickness of the hexagonal crys-
tals used in the current SUPERIA X-TRA 400. The
higher uniformity in size and improved light-collection
efficiency of these grains have made possible a film
with higher sensitivity than that of the current
SUPERIA X-TRA 400 and extremely smooth grain
quality, regardless of the film’s high speed.
10-2 Super Efficient Coupler Technology
The use of new couplers has enhanced color develop-
ment efficiency.
CN-16Q
Processing
Solution
NQ1-R
NQ2-R
NQ3-R
NQS
NQ4-R
Replenish-
ment Rate*
43
20
30
30
20
CN-16FA
Processing
Solution
N1-R
N2-R
N3-R
NS
N4-R
Replenish-
ment Rate*
22
5
16
34
20
CN-16L
Replenish-
ment Rate*
20
5
8
17
15
CN-16S
Replenish-
ment Rate*
15
5
7.5
30
SUPERIA X-TRA 400
9-3 Packaging
Item
• Box New Design
Identification Color: Blue (unchanged)
• Cartridge Design
(unchanged)
Identification Color: Blue
9-4 Post-Processing Masking Colors
The new SUPERIA X-TRA 400 has slight reddish tint in
comparison with the current SUPERIA X-TRA 400.
11. PROCESSING
This film is intended for processing by Fujifilm Pro-
cesses CN-16, CN-16Q, CN-16FA, CN-16L, CN-16S or
Process C-41.
11-1 Replenishment Rate
The following table shows the replenishment rates for
each type of Fujifilm Processes.
Processing
Solution
N1-R
N2-R
N3-R
NS
N4-R
Processing
Solution
N1-R
N2-R
N3-R
N4-R
*Replenishment Rate ...... Replenisher volume (mL) per single roll
(135/24 exp.)
Production
Number
Production
Identification Code
Edge Stripe
(green and red)
Type Designation
Production
Identification Code
Latent Image Bar Code