FujiFilm A800 Digital Camera User Manual


 
103
Software Installation
Installation on a Mac OS X
Pre-installation checklist
ZHardware and software requirements
To run this software, you must have the hardware and software described below. Check your system before you begin the
installation.
*
1
PowerPC, Intel processor loaded
*
2
Models with a USB port as a standard feature
*
3
Required to use the FinePix Internet Service. The software can still be installed even if you do not have an Internet
connection.
CAUTION
Connect the camera directly to the Macintosh using the USB cable (mini-B). The software may not operate correctly if you use an
extension cable or connect the camera via a USB hub.
Push the USB connector fully into the socket to ensure that it is securely connected. The software may not operate correctly if the
connection is faulty.
Additional USB interface board is not guaranteed.
Continued Q
Compatible Mac
*
1
Power Macintosh G3
*
2
, PowerBook G3
*
2
,
Power Macintosh G4, iMac, iBook,
Power Macintosh G4 Cube, PowerBook G4, Power Macintosh G5, MacBook,
MacBook Pro or Mac Mini
Operating System Mac OS X (compatible with version 10.3.9 to 10.4.8)
RAM 256 MB or better recommended
Hard disk space
Amount required for installation: 200 MB minimum
Amount required for operation: 400 MB minimum
Display 800 × 600 pixels or better, at least 32,000 colors
Internet connection
*
3
To use the FinePix Internet Service or mail attachment function:
An Internet connection or e-mail transmission software is needed
Connection speed: 56 kbps or better recommended