Filter
Top Products
117
Software Installation
Connecting to a PC
By connecting the camera to a PC, your system can be
expanded to fill a wide range of uses. Using
“FinePixViewer” performs images saving, browsing and
file management etc.
MEMO
If the power cuts out during data transmission, the data
will not be transmitted correctly. Always use the AC power
adapter when connecting the camera to a PC.
CAUTION
• Do not format the xD-Picture Card in the camera on
the PC.
• Use the xD-Picture Card with images taken by a
FUJIFILM Digital camera.
Continued Q
AInsert the xD-Picture Card with images into the
camera (➝p.19).
BConnect the camera to your PC using the USB cable
(included).
CD-ROM
(Software for FinePix CX)
Refer to Software
Installation (➝p.111, 114)
the first time you connect
the camera to your PC.
Install the software first. Do
not connect the camera to
the PC before installing all
the software.
CPress w for about 1 second to turn the
camera on in Playback mode.
;
AC-5VC
USB
socket
SU1810GB.book Page 117 Tuesday, April 4, 2006 2:19 PM