FujiFilm FinePix S3 Digital Camera User Manual


 
22 23
Getting Ready
1
LOADING THE BATTERIES
Compatible Batteries
h AA-size Ni-MH batteries (HR-AA) (4)
How to use the battery
hUse only Ni-MH (nickel-metal hydride) batteries.
hNever use the following types of batteries, as they could cause serious
problems such as battery fluid leakage or overheating:
1. Batteries with split or peeling outer casings
2. Combinations of different types of batteries or new and used batteries
together
hSoil (such as fingerprints) on the battery terminals makes the batteries charge less reducing the
number of images they will allow you to take. Carefully wipe the battery terminals with a soft dry cloth
before loading.
hSee P.129 for other notes on using batteries.
hWhen first used after purchasing or left unused for a long period, the time for which AA-size Ni-MH
rechargeable batteries can be used may be shorter. You are advised to check the detailed
information provided on P.129 and then charge the batteries before using the camera (within 1 week).
Outer casing
Set the Power switch to “OFF” to turn the camera
off.
1
1Lift out the battery holder release catch.
2Turn the battery holder release catch
counterclockwise to unlock the battery holder.
3Pull the battery holder out.
2
Push the battery holder in and hold it in place as
you turn the battery holder release catch clockwise
to securely lock the battery holder.
4
!
Remove the batteries more easily by pushing the batteries
upwards from the gap at the opposite end from the battery
holder release catch.
01
01
02
03
Load the AA-size Ni-MH rechargeable batteries in
the direction indicated by the and labels on
the holder. Align the battery ends with the terminals
in the sequence shown in the figure and then
slowly push them into the place.
3
01
02
03
04
02
03