Filter
Top Products
14 15
Viewfinder display
●
!
The viewfinder will be dark without battery power but brightens after installation of fresh batteries. This is not a
malfunction.
●
!
The LCD panel in the upper part of the viewfinder (focus area and On-Demand Grid Lines) will become paler at high
temperatures and will become darker and respond a little more slowly at low temperatures. However, it will operate
normally again at normal temperatures.
●
!
The LCD panel in the viewfinder display (where the icons and numbers are displayed) will turn dark at high temperatures
and will respond a little more slowly at low temperatures. However, it will operate normally again at normal temperatures.
◆
About Advanced Focusing Screen Display
◆
The new Advanced Focusing Screen Display of the FinePix S3 Pro employs the convenient Vari-Brite
Focus Area display system; it enables clear display of the focus brackets at the selected focus area in
the viewfinder for easy identification. When the finder image is bright, the focus brackets are displayed
in black and when the finder image is dark, the focus brackets are momentarily illuminated in red. The
selected focus area can be identified easily in both bright and dark conditions with this function.
Also, the new Advanced Focusing Screen Display allows the superimposition of On-Demand Grid
Lines. The grid lines can be displayed by using Custom Setting Menu #2 (➡P.111). These grids assist
you in composing the frame, in taking landscape pictures or in shifting/tilting PC-Nikkor lenses.
✽ Due to characteristics of the LCD used in the Vari-Brite Focus Area display system, a thin line
outside the selected focus area may also be displayed or the entire viewfinder may be illuminated in
red under certain conditions. These are not malfunctions.
12mm-dia reference
circle for center-
weighted metering area
(P.54)
Focus
indicator
(P.36)
Flash ready-light
(P.70)
Exposure compensation value
/ Flash exposure
compensation value
(P.63, 73)
Shutter speed
Aperture
Focus area
(P.47)
Metering system (P.54)
Multiple exposure (P.52)
AE-L (Auto exposure lock)
indicator
(P.41)
Exposure compensation (P.63)
Flash exposure compensation (P.73)
Exposure mode (P.56-62) / Electronic
analog exposure display / Exposure
compensation value display
(P.63)
● Viewfinder information display
On-Demand Grid Lines
(P.111)
Focus area
Spot metering area
(P.54)
Rear display panel
Camera parts and features
■ During playback
100-0009
100-0009
125 F5.6 ISO200
D
:
AUTO C
:
STD
T:STD
S:STD
100-0009
01 / 01 / 2004 12 : 00 AM
WB:AUTO NORMAL 6M F:STD
Media
Press the “FUNC”
button to switch
between functions.
Playback mode
Frame number
Multi-frame playback
Protection
Shutter speed Aperture
Sensitivity
Recorded pixels
White balance
Date / Time
Erase
Histogram
Sharpness
Tone
Color
Quality
Battery charge indicator
Color space (only AdobeRGB shown)
Film simulation
Dynamic range