Filter
Top Products
89
Viewing Images
88
h When the camera and computer are exchanging
data, the self-timer lamp blinks and the indicator
lamp blinks alternately green and orange.
h “‘” appears on the screen.
h Power Save and Auto Power Off are disabled
during USB connection.
●
!
Before replacing the xD-Picture Card, always disconnect the
camera from the PC using the procedure on P.91.
●
!
Do not disconnect the USB cable when the camera is
communicating with the PC. See P.91 for information on the
disconnection procedure.
PC
USB socket
DC IN 5V
socket
USB
socket
(Mini-B)
6.1 CAMERA CONNECTION
1Load an xD-Picture Card containing photographed
images into your camera. Plug the AC power
adapter connector into the “DC IN 5V” socket on
the camera and then plug the adapter itself into
the main power outlet.
2Turn the Power switch to turn the camera on.
3Set the “USB MODE” setting in the “SET
–
UP”
menu to “¶” (➡P.73).
4Turn the Power switch again to turn the camera
off.
1Switch your PC on.
2Use the USB cable (Mini-B) to connect the camera
to your computer.
3Switch the camera on.
USE AT DSC MODE
Indicator
Indicator
01
03
0204
●
!
The Windows CD-ROM may also be required during installation. In this event, switch CD-ROMs as directed by the
on-screen instructions.
h FinePixViewer automatically starts up.
✽ Screen for Windows 98 SE
Windows 98/98 SE/Me/2000 Professional/Macintosh
h A removable disk icon appears and you can use your PC to transfer files to and from the
camera.
Windows Macintosh
If the above operations do not occur, you do not have the required software programs or drivers
installed on your PC. Complete the required PC setup procedures. Then reconnect the camera to
your PC.
●
!
It is recommended that you connect the AC Power Adapter
AC-5V. Constant power supply will prevent successful data
transfer from trouble caused by power supply.
1
Set a camera
2
Connect a camera to a computer
3
Set a computer
●
!
Take care to ensure that the USB cable (Mini-B) is connected
the correct way around and that the plugs are pushed fully
into the connection sockets.