Filter
Top Products
DC IN 5V
socket
87
Viewing Images
86
1
DC IN 5V
socket
A/V OUT
socket
2
Video(yellow)
Audio(white)
To terminals
6.1 CAMERA CONNECTION
6
Viewing Images
Switch off the camera and TV. Plug the A/V cable
(provided with the camera) into the “A/V OUT”
(audio/visual output) socket.
Plug the other end of the cable into the video input
socket on the TV. Then switch the camera and TV
on and play back images as you would normally.
●
!
If there is a power outlet available, connect the AC-5V AC
Power Adapter.
●
!
Images are only sent to the TV in Playback mode.
●
!
Refer to the instructions provided with your TV for more
information on video input for your TV.
6.1.2 Connecting to a TV
The “Camera Connection” section explains how to connect the camera to your computer using the
USB cable (Mini-B) and describes the functions you can use once the camera and computer are
connected.
If the power cuts out during data transmission, the data will not be transmitted correctly. Always use the
AC power adapter when connecting the camera to a computer.
For more information on using the software, refer to “How
to use FinePixViewer” in the HELP menu which was
installed from the CD-ROM.
Refer to Section 5 the first time you connect the camera to your computer.
Do not connect the camera with the computer before
installing all the software.
This mode provides a simple way to read images from an xD-Picture Card and store images on to
an xD-Picture Card (➡P.88).
CD-ROM
(Software for FinePix SX)
¶
DSC
(
Mass storage device
)
mode
This function allows you to conduct videoconferencing sessions between PCs connected to the
Internet.
●
!
Videoconferencing (“PictureHello”) is not supported on Macintosh computers.
●
!
Connection is only possible with a FUJIFILM camera equipped with a “PC Camera” function.
q
PC PC CAM
(
PC Camera
)
mode
Connecting the AC power adapter does not allow
you to charge the Ni-MH batteries. Use the optional
charger (➡P.95) to charge the Ni-MH batteries.
You can switch between “¶” and “qPC” in the
camera’s SET
–
UP screen.
Check that the camera is switched off. Plug the AC
power adapter connector into the “DC IN 5V”
socket and then plug the AC power adapter into the
power outlet.
●
!
The socket-outlet shall be installed near the equipment and
shall be easily accessible.
●
!
The shape of the plug and socket-outlet depends on the
country of use.
●
!
See P.98 for notes on using the AC power adapter.
6.1.1 Using the optional AC Power Adapter
(
sold separately
)
It is strongly recommended for using a FUJIFILM AC Power Adapter AC-5VH/AC-5VHS (➡P.95) in
order to avoid losing power at inconvenient times, such as when you are downloading
photographed images to your computer. Using the AC power adapter also allows you to take
pictures and play back images without worrying about depleting the batteries.
●
!
Only connect or disconnect the AC power adapter when the camera is switched off.
Connecting or disconnecting the AC power adapter while the camera is switched on temporarily interrupts the power
supply to the camera, so that images or movies being shot at the time are not recorded. Failing to switch the camera off
first can also result in damage to the xD-Picture Card or malfunctions during PC connection.
6.1.3 Connecting to a computer