Filter
Top Products
29
Using
the Camera
28
VIEWING YOUR IMAGES
(
PLAYBACK
)
PLAYBACK MODE
Playback zoom
Pressing the “T” or “W” button during single-
frame playback zooms (enlarges) the still image.
When you do this, a zoom bar is displayed.
h Zoom scales
5 2816 × 2120 pixel images : Max. 18×
3 2048 × 1536 pixel images : Max. 13×
2 1600 × 1200 pixel images : Max. 10×
1 1280 × 960 pixel images : Max. 8×
●
!
You cannot use multi-frame playback during playback
zoom.
Panning
You can view another area by pressing “a”,
“b”, “d”, or “c”.
Trimming
Check the size of the saved image and press the
“MENU/OK” button. The cropped image is added
as a separate file in the final frame.
Press the “MENU/OK” button
to crop the image.
■ Image Sizes
The size of the saved image varies depending
on the zoom ratio. If the image size is
1 or
less, the “
ΩTRIMMING” display disappears
and you cannot save the image trimmed. For
CCD-RAW files, “
ΩTRIMMING” is not
displayed and trimmed images cannot be saved.
Zoom bar
Single-frame playback
Press the “BACK” button
to cancel playback zoom.
3
Best for A5 to A4 size prints
2
Best for A6 to A5 size prints
1
Best for A6 size prints
ERASING IMAGES
(
ERASE FRAME
)
PLAYBACK MODE
1
Set the Power switch to “w”.
2
3
1Press the “MENU/OK” button during playback to
display the menu.
2Press “d” or “c” to select “o” ERASE.
Note that mistakenly erased frames (files) cannot
be recovered. You should back up important
frames (files) that you do not want to be erased
onto your computer or other media.
4
1Press “d” or “c” to select the frame (file) to be
erased.
2Press the “MENU/OK” button to erase the
displayed frame (file).
To erase another image, repeat steps 1 and 2.
01 02
01 02
1Press “a” or “b” to select “FRAME”.
2Press the “MENU/OK” button to confirm the
selection.
See P.61 for information on “ALL FRAMES”.
01 02
●
!
Pressing the “MENU/OK” button repeatedly erases
consecutive images. Take care not to erase an image by
mistake.
●
!
Press “a” or “b” to select “QBACK” and press “MENU/OK”
button to return to single-frame playback.
●
!
Press the “BACK” button to cancel erasing single frame.