Filter
Top Products
10 11
Getting Ready
1
3
4
2
1
Pull the lens cap cord through the strap.
●
!
Attach the lens cap cord to avoid losing the lens cap.
●
!
Failure to attach the strap correctly can result in the camera
being dropped.
Attach the strap to the strap mounts on the camera.
Once you have attached both ends of the strap,
check carefully to ensure that the strap is firmly
secured.
Screw the adapter ring in the direction of the arrow
to mount it on the camera.
To prevent the lens cap from appearing in the shot
when you take pictures, attach the lens cap to the
strap.
Attach the lens cap to the lens by pressing in on
each side of the cap.
ATTACH THE LENS CAP
/
STRAP
/
ADAPTER RING
1 Getting Ready
Attaching the lens cap
Mounting the adapter ring on the camera not only
blocks unwanted external light but also protects the
lens and allows the optional conversion lens to be
attached.
Mount the adapter ring on the camera at all times.
Compatible batteries
h AA-size alkaline batteries (4), or optional AA-size Ni-MH batteries (4).
●
!
Please use the same brand and grade AA-size alkaline batteries as those supplied with the camera.
◆
How to use the battery
◆
hNever use the following types of battery, as this could cause serious
problems such as battery fluid leakage or overheating :
1. Batteries with split or peeling outer casings
2. Combinations of different types of batteries or new and used batteries
together
hDo not use manganese or Ni-Cd batteries.
hSoil, such as fingermarks on the poles of the batteries can significantly reduce the amount of time
for which the batteries can be used.
hThe time for which AA-size alkaline batteries (referred to hereafter simply as alkaline batteries)
can be used varies depending on the brand, and some alkaline batteries may stop providing
power more quickly than those supplied with the camera. Note also that due to their nature, the
time for which alkaline batteries can be used decreases in cold conditions (0°C to +10°C). The
use of AA-size Ni-MH batteries is recommended for this reason.
hUse Fujifilm Battery charger (sold separately) to charge AA-size Ni-MH batteries.
hSee P.97-99 for other notes on using batteries.
hWhen first purchased or if left unused for a log period, the time for which AA-size Ni-MH
batteries or rechargeable Battery NH-10 can be used may be shorter. See P.98 for details.
Check that the camera is switched off (indicator
lamp switches off) before opening the battery
cover.
●
!
If you open the battery cover while the camera is switched on,
the camera is switched off.
●
!
Do not apply excessive force to the battery cover.
Do not open the battery cover while the camera is
still switched on. This could damage the xD-
Picture Card or corrupt the image files on the xD-
Picture Card.
LOADING THE BATTERIES
Outer casing
2
01 02
1Load the batteries correctly as shown.
2Press the batteries down with the battery cover
while sliding the battery cover closed.