Filter
Top Products
56 57
Settings
4
FRAME NO.
Specifies whether frame numbers are assigned
consecutively from previous numbers or begin
again.
CONT.: Pictures are stored beginning from the
highest file number stored on the last xD-
Picture Card used.
RENEW: Pictures are stored on each xD-Picture
Card beginning with a file number “0001”.
Setting this function to “CONT.” makes file
management easier as it makes sure that file
names are not duplicated when images are
downloaded to a PC.
●
!
When the camera settings are “q RESET”, the frame
number setting (“CONT.” or “RENEW”) is changed to
“CONT.” and the frame number itself does not return to
“0001”.
●
!
When the xD-Picture Card already contains image files with
file numbers higher than the highest file number on the last
xD-Picture Card, images are stored beginning from the
highest file number on the current xD-Picture Card.
AA
BB
CONT. RENEW
Formatted xD-Picture Card used for both
A and B.
Check the file number by viewing the image. The
last 4 digits of the 7-digit number in the top right
corner of the LCD monitor are the file numbers,
while the first 3 digits show the directory number.
●
!
When changing the xD-Picture Card, always turn the
camera off before opening the battery cover. Opening the
battery cover without turning the camera off may cause the
frame number memory to not function.
●
!
File number runs from 0001 to 9999. Once 9999 is exceeded,
the directory number changes from 100 to 101. The
maximum number is 999-9999.
●
!
The displayed frame number may differ for images
photographed on other cameras.
●
!
When “t” appears, see P.82.
File number
Frame number
Directory number
2 / 2 4/4 / 2 000 0 5 1 0:0 : 000 0 AMA M
101 0 0
-
00090 0 0 9
5
When the Photography mode is selected with world
time set, “ß” appears on the LCD monitor for 3
seconds.
2 / 2 4/4 / 2 000 0 5
1 2121 2NN
SET-UP
LOCALL O C A L
2 / 2 4/4 / 2 000 0 5 1 0:0 : 000 0 AMA M
T I MEM E DI D I FFEF F E R E N CEC E
SETS E T CANCELC A N C E L
LOCAL O C A T IONI O N
T I MEM E DI D I FFEF F E R E N CEC E SETS E T
1Press “a” or “b” to select “TIME DIFFERENCE”.
2Press “c”.
01 02