Filter
Top Products
First Steps
13
Basic Setup
A language-selection dialog is displayed the rst time the camera is turned on. Set up the camera as
described below (for information on resetting the clock or changing languages, see page 74).
1
Choose a language.
SET NO
START MENU
1.1 Press the selector up, down,
left, or right to highlight a lan-
guage.
1.2 Press MENU/OK.
2
Set the date and time.
SET NO
DATE / TIME NOT SET
2011
2010
2008
2007
1. 1 12
:
00
AM
2009
YY. MM. DD
2.1 Press the selector left or right
to highlight the year, month,
day, hour, or minute and press
up or down to change. To change the or-
der in which the year, month, and day are
displayed, highlight the date format and
press the selector up or down.
2.2 Press MENU/OK.
2 Tip: The Camera Clock
If the battery is removed for an extended period, the camera clock will be reset and the language-selection dialog
will be displayed when the camera is turned on. If the battery is left in the camera for about two hours, the bat-
tery can be removed for about 24 hours without resetting the clock or language selection.