FujiFilm X-S1 Camcorder User Manual


 
71
Connections
Printing Pictures via USB
If the printer supports PictBridge, the camera can be connected directly to the printer and
pictures can be printed without first being copied to a computer. Note that depending on
the printer, not all the functions described below may be supported.
Connecting the Camera
Connecting the Camera
1
Connect the supplied USB cable as shown and
turn the printer on.
2
Turn the camera on. t USB will be displayed
in the monitor, followed by the PictBridge dis-
play shown below at right.
USB
00
OK
FRAME
TOTAL:
00000
SHEETS
PICTBRIDGE
SET
Printing Selected Pictures
Printing Selected Pictures
1
Press the selector left or right to display a pic-
ture you wish to print.
2
Press the selector up or down to choose the
number of copies (up to 99).
3
Repeat steps 1–2 to select additional pictures.
Press MENU/OK to display a confirmation dialog
when settings are complete.
PRINT THESE FRAMES
TOTAL:
9
SHEETS
YES CANCEL
4
Press MENU/OK to start printing.