Filter
Top Products
28
J Using the Self-Timer
The camera o ers a ten-second timer that
allows photographers to appear in their own
photographs, and a two-second timer that can
be used to avoid blur caused by the camera
moving when the shutter button is pressed.
1
Set the timer.
The current self-timer mode is displayed in
the monitor. To choose a di erent setting,
press the selector down (J). The selection
changes each time the selector is pressed.
The current self-timer
mode is displayed in the
monitor.
c : The picture is taken
after 10 seconds.
b : The picture is taken
after 2 seconds.
2
Focus.
Press the shutter button halfway
to focus.
Caution
Stand behind the camera when using the
shutter button. Standing in front of the lens can
interfere with focus and exposure.
3
Start the timer.
Press the shutter button the rest
of the way down to start the
timer. The display in
the monitor shows
the number of
seconds remaining
until the shutter is
released. To stop
the timer before the
picture is taken, press DISP/BACK.