Filter
Top Products
87
Troubleshooting
Warning Messages and Displays
The following warnings are displayed in the monitor:
Warning
Warning
Description
Description
Solution
Solution
O (red) Low battery.
Charge the battery or insert a fully-charged spare
battery.
N (blinks red) Battery exhausted.
0
Slow shutter speed. Picture may be blurred. Use the ash or mount the camera on a tripod.
R
(displayed in red with
red focus frame)
The camera can not focus.
•
Use focus lock to focus on another subject at the
same distance, then recompose the picture (pg. 23).
• If the subject is poorly lit, try focusing at a distance
of about 2 m (6 ft. 7 in.).
• Use macro mode to focus when taking close-ups.
Aperture or shutter
speed displayed in red
The subject is too bright or too dark. The
picture will be over- or under-exposed.
If the subject is dark, use the ash.
PRESS THE SHUTTER BUTTON
TO GO BACK TO SHOOTING MODE
CLOSE THE LENS COVER
TO TURN OFF THE CAMERA
D button pressed while lens cover is open.
To exit to shooting mode, press the shutter button.
Close the lens cover to turn the camera o .
FOCUS ERROR
Camera malfunction.
Turn the camera o and then on again, taking care
not to touch the lens. If the message persists, contact
a FUJIFILM dealer.
ZOOM ERROR
NO CARD
No memory card inserted when COPY is
selected in the playback menu.
Insert a memory card.
CARD NOT INITIALIZED
The memory card or internal memory is not
formatted.
Format the memory card or internal memory (pg. 76).
The memory card contacts require
cleaning.
Clean the contacts with a soft, dry cloth. If the
message is repeated, format the memory card (pg.
76). If the message persists, replace the memory card.
Camera malfunction. Contact a FUJIFILM dealer.
PROTECTED CARD The memory card is locked. Unlock the memory card (pg. 8).
BUSY The memory card is incorrectly formatted. Use the camera to format the memory card (pg. 76).