Filter
Top Products
560H Series Connector Conforming to Ver. 4
4
Dimensions are in millimeters (inches) www.fcai.fujitsu.com
Specifications
subject to change
0.51 (0.059)
3 (0.118)
1.905 (0.075)
3.810 (0.15)
5.715 (0.225)
6 (0.236)
8 (0.315)
7 (0.276)
4.5 (0.177)
2.42 (0.095)
35.2 (1.385)
11.2 (0.441)
59.7 (2.35)
50.8 (2)
2- ø 2.2 (0.0866)
1.27 (0.05) × (34 – 1) = 41.91 (1.65)
1.27 (0.05)
No.1 No.17
No.35 No.51
No.34
No.68
1.27 (0.05)
53.7 (2.114)
8.5
RIGHT-ANGLE PLUG, THROUGHHOLE TYPE (WITH NO EJECTOR, TO BE MOUNTED ON
THE BACK OF THE PC BOARD) SUPPORTS TYPE I, II CARDS
■ DIMENSIONS AND PC BOARD MOUNTING HOLE LAYOUT (MOUNTING SIDE)
RIGHT-ANGLE PLUG, THROUGHHOLE TYPE (WITH NO EJECTOR, RAISED MOUNTING
TYPE)
SUPPORTS TYPE I, II CARDS
■ DIMENSIONS AND PC BOARD MOUNTING HOLE LAYOUT (MOUNTING SIDE)
Unit: mm (in.)
Part number: FCN-565P068-G/F-V4
Part number: FCN-565P068-G/J-V4 (SUPPORTS TYPE I, II CARD)
Part number: FCN-565P068-G/J-4V (SUPPORTS TYPE I, II, III CARD)
7 (0.276)
2.5
(0.098)
1 (0.039)
5.715 (0.225)
3.810 (0.15)
1.905 (0.075)
0.51 (0.059)
2.42 (0.095)
35.2 (1.385)
11.2 (0.441)
59.7 (2.35)
50.8 (2)
1.27 (0.05)
1.27 (0.05) × (34 – 1) = 41.91 (1.65)
(2) M2.5 (0.098 in.)
thread nut
1.27 (0.05) × (34 – 1) = 41.91 (1.65)
1.27 (0.05)
1.27 (0.05)
No.68 No.51
No.35
No.1No.17No.34
4(0.157)
Unit: mm (in.)
• A model with no nuts buried is available. Part number: FCN-565P068-G/H-V4
• Applicable screw: Self-tapping screw M2.5 (0.098 in.) x 5 mm (0.197 in.) (for 1.6 mm (0.063 in.) thick PC board)
• A model mounted on bottom of a PC board is also available. Part number: FCN-565P068-G16-V4 (supports type I, II)
50.8 (2)
±0.05 (0.0039)
1.27 (0.05) × (68/2-1) =
41.91 (1.65)
±0.1 (0.0039)
1.27 (0.05)
±0.05 (0.0020)
No.34
No.68
5.715 (0.225)
±0.05 (0.0020)
3.810 (0.15)
±0.05 (0.0020)
1.905 (0.075)
±0.05 (0.0020)
No.35
68- ø 1 (0.039)
±0.05 (0.0020)
(Card insertion side)
2- ø 2.8 (0.110)
±0.1 (0.0039)
<To be mounted on back of PC board>
No.1
50.8 (2)
±0.1 (0.0039)
41.91 (1.65)
±0.1 (0.0039)
1.27 (0.05)
±0.05 (0.0020)
No.3
No.1
No.2
5.715 (0.225)
±0.05 (0.0020)
3.810 (0.15)
±0.05 (0.0020)
1.905 (0.075)
±0.05 (0.0020)
No.68
2- ø 2.8 (0.110)
±0.1 (0.0039)
68- ø 1 (0.039)
±0.05 (0.0020)
(Card insertion side)