Filter
Top Products
6-29
4. Press or .
The displayed option changes (■ ■ ■ ❑ ❑ ❑ to
■ ■ ■ ■ ■ ■ or ■ ❑ ❑ ❑ ❑ ❑).
5. When the desired option appears, press
ENTER
to save the change.
The LCD returns to the <<SETUP MODE>>
menu screen (Buzzer Volume).
6. Press
CANCEL
two times.
The LCD returns to the Ready screen.
<<SETUP MODE>>
Buzzer Volume
Buzzer Volume
Min ■ ■ ■ ❑ ❑ ❑ Max
Ready
LCD contrast
This function sets the contrast of the LCD on the operator panel in six steps.
Remarks
Dark (low contrast)
to (six steps)
Bright (high contrast)
LCD display
LCD Contrast
Options
■ ❑ ❑ ❑ ❑ ❑
to (Default: ■ ■ ❑ ❑ ❑ ❑)
■ ■ ■ ■ ■ ■
* Symbols of volume may differ from the actual symbols used in the LCD.
The following is an example of operation when you use this function.
1. In <<SETUP MODE>> initial screen, press
ENTER
.
The <<SETUP MODE>> menu screen
(Settings or Paper Length Check) appears.
NOTE
The “Settings” screen does not appear and
the “Paper Length Check” screen first ap-
pears when your scanner is not controlled
through the video or TP interface.
<<SETUP MODE>>
<<SETUP MODE>>
Settings
<<SETUP MODE>>
Paper Length Check