Filter
Top Products
8
3. Drill three 1/8” holes in mounting
location and insert wall anchors
provided. Position wall bracket over the
anchors and install screws or
screw directly into a stud.
4. Run the 60’ cable from the camera’s
location to the location of the Monitor.
Use the cable clips provided to keep
the cable in place. (See Notes on
Cable Installation.)
5. Adjustments can
now be made to the
camera viewing
angle by loosening
the adjustment knob
and tilting and
rotating the
camera head.
NOTES ON CABLE INSTALLATION
Use care when running the cable from the
camera to the TV, VCR or DVR; when securing the
cable, do not cut, pierce or puncture. DO NOT RUN
CABLE INSIDE WALLS.
Keep the camera cable away from other cables
where possible, in order to reduce the risk of picture
and audio interference.
1.
2.