Filter
Top Products
Grandstream Networks, Inc. 2011 P a g e | 2
Configuration on go1984:
To configure the go1984 to get the streaming from the Grandstream IP Camera or Video Encoder please
follow the steps below:
1. Launch the go1984 application
2. Depending on your access rights (please refer to go1984 user manual), you can add an IP camera or
Video Encoder. To add an IP camera or a Video Encoder, there are 2 ways:
a. Click On the “Add Camera” pull down menu (see Fig. 2):
i. Select Grandstream
ii. Select your Grandstream IP camera or Video Encoder. The Add Camera dialog box
will pop up.
Fig.2: Adding the Grandstream IP Camera or Video Encoder using the pull down menu
b. By using the search feature (see Fig. 3):
i. Type in “Grandstream” in the search textbox. A list of Grandstream devices will be
displayed.
ii. Click on the picture of the Grandstream IP camera or Video Encoder that you have.
The Add Camera dialog box will pop up.
Fig.3: Adding the Grandstream IP Camera or Video Encoder using go1984 search filter