Filter
Top Products
1 - 14 4600g, 4600r, 4800i User’s Guide
The
Wand Emulation Plug & Play (Code 39 Format)
bar code below sets the
terminal ID to 61. The
Wand Emulation Plug & Play Same Code
bar code sets
the terminal ID to 64. These bar codes also set the Transmission Rate to 25
inches per second, Output Polarity to black high, and Idle State to high. (If you
want to change the terminal ID
only
, without changing any other imager settings,
please refer to Wand Emulation Connection on page 2-12.)
Wand Emulation
Plug & Play
Same Code
Wand Emulation
Plug & Play
(Code 39 Format)