Filter
Top Products
H1 IMPRINT MODE
www.hasselblad.com
From the normal
screen press the
“MENU” button.
Use the front wheel to
select the menu
“Settings”, then press
the “Drive” button.
(marked with “Enter”
on the LCD)
Use the front wheel
to select the menu
“Imprint”, then press
the “Drive” (Enter)
button.
Use the front wheel
to select the menu
item “Text”, then
press the “Drive”
(Enter) button.
The main text screen will now appear which,
by moving the control wheel, will display all
the available characters.
The two control wheels and the three buttons
over the LCD are used to enter the text.
How this setting is made is explained in detail
on the following pages.
Imprint text mode setting
To enter custom text for imprinting, proceed as follows:
Document ID: H1 imprint modes.indd - 2005-05-10