HP (Hewlett-Packard) CC330 Camcorder User Manual


 
2322
2322
Panorama mode
Panorama mode allows you to create a panoramic picture across a distant scene. The camera will
automatically compose a panoramic picture using the individual shots that you take.
Follow these steps to create a panoramic picture:
1. Press the
and use the Right button to highlight the Panorama Mode ( ) and press the to enter.
2. Use the
Left/Right buttons to specify the direction of picture taking, and then in 2 seconds the panoramic
sequence will commence automatically.
3. Compose the rst view of the panoramic
picture on the LCD screen and press the
Shutter button to capture.
4. After the rst shot is taken, the semi-
transparent image of the rst shot will
appear at the edge of the screen. You
can use this image to compose your
picture before you press the Shutter button to capture and nish manual stitching.
5. The camera will then stitch the pictures into a panorama automatically.
6. Press the
button to enter Playback mode and review the panorama result.
After taking a Panoramic picture press the button to save and exit or press the Delete button to
cancel and exit.
Flash Mode, Self-timer, Macro Mode, and Exposure Compensation are disabled on Panorama Mode.
Pictures cannot be deleted, nor the zoom adjusted until the series is nalized.
Panorama Mode can stitch 2 or 3 maximum