Filter
Top Products
Set the date and time
Accurately setting the date and time will help you locate
images once you have uploaded them to your computer,
and will ensure that images are accurately marked if you
use the date and time imprint feature
1.
Use
to adjust the
highlighted value.
2. Use
to move to the
other selections and
repeat Step 1 until the
date and time are set
correctly.
3.
Press
when the date, time, and format settings
are correct, then press
again to confirm.
Install and format an optional
memory card
This camera supports standard and high speed, HP-
branded Secure Digital (SD) memory cards, 8MB to
2GB.
1. Turn off the camera
and open the
Battery/Memory
card door.
2. Insert the optional
memory card in the
smaller slot as
shown. Make sure the memory card snaps into
place.
3. Close the Battery/Memory card door and turn on the
camera.
Setting up your camera 11
English