Filter
Top Products
11. Function setting and changes
BE-IR20 / 21
17
11-7 HD and VD output (BE-IR20 only)
The BE-IR20 can be provided with horizontal and vertical drive outputs by changing chip parts.
Change the following chip parts to provide HD and VD outputs.
R233 R239 R240 R241 R242 R248 R249 R250
Factory setting
0 Ω Absent 0 Ω Absent 0 Ω Absent 0 Ω Absent
HD & VD output Delete 0 Ω Delete 0 Ω Delete 0 Ω Delete 0 Ω
0 Ω
Part code RME1784
Type ERJ3GEYJ0R00V
Connector pin assignments after
change
Location of chip resistors(Main board side B)
Note:
Note:Note:
Note: The accessory cable cannot
The accessory cable cannotThe accessory cable cannot
The accessory cable cannot
be used for signal outputs.
be used for signal outputs.be used for signal outputs.
be used for signal outputs.
Pin No. Signal
Video out
Video GND
GND
+9V
HD out
VD out
HD/VD GND