Filter
Top Products
English
152
INSERTING 3D TITLE IMAGES
You can attach a 3D title to the images recorded on a DVD-RAM.
1 Connect the DVD video camera/recorder in
which the DVD-RAM to be edited is loaded
to USB port of PC.
2 Start up DVD-MovieAlbumSE.
The contents recorded on the DVD-RAM will
appear.
From this screen, you can cut, move scenes,
and create a play list.
3 Right-click the top of program, and then
choose “Enter 3D Title”.
The 3D title creation screen (3D-Title
STUDIO) will start.
You can then attach a 3D title to the top of
program.
4 Click “OK”.
The set 3D title will be written to the DVD-
RAM.
Note:
• To attach a 3D title to a designated position, divide
the program at that position.
• The attached 3D title will be treated as one scene by
this DVD video camera/recorder. If you wish to
combine it with subsequent scenes, use DVD-
MovieAlbumSE to delete the chapter of the scenes
that follow the 3D title, or use the Disc Navigation
function of this DVD video camera/recorder to select
the 3D title and the scenes that follow it, and combine
them (see page 116).
• A DVD-RAM requires free space of several tens
seconds to attach a 3D title.
• No 3D title can be entered while in the HDD mode of
DVD-MovieAlbumSE.