Hitachi DZ-GX5020E Camcorder User Manual


 
English
54
RECORDING SUBJECTS FOR STRONGER WIDE-ANGLE OR TELEPHOTO
EFFECT
Use the tele-conversion lens or wide-conversion lens with the following filter diameter and thread
pitch to record subjects for stronger telephoto or wide-angle effect:
Filter diameter: 34 mm for DZ-GX5060E/GX5040E/GX5020E; 30.5 mm for DZ-GX5100E
Thread pitch: 0.5 mm
When attaching the optional DZ-TL1 tele-conversion lens or DZ-WL1 wide-conversion lens, use the
optional step-up ring: DZ-SR3437 for DZ-GX5060E/GX5040E/GX5020E, DZ-SR3037 for DZ-
GX5100E (see page 130).
1 Attach the step-up ring over the lens.
2 Remove the cap of conversion lens, and screw the lens into the thread of step-up ring.
Note:
With DZ-TL1 tele-conversion lens, the focusing range
at “T” (telephoto) control side is between approx. 5 m
and infinite.
When a conversion lens is attached, note that the four
corners of screen will be slightly dim if you zoom in on
a subject on the W control side (wide-angle side).
When replacing the lens, take care not to drop the
DVD video camera/recorder.
If a generally available filter is attached, do not attach
the removed lens hood.
Some generally available conversion lenses may not
be usable on this DVD video camera/recorder,
depending on the lens maker.
Tele-conversion lens: For stronger telephoto effect
Wide-conversion lens: For stronger wide-angle effect
(Attach)
Conversion lens
Step-up ring