Filter
Top Products
English
101
PROTECTING DISC FROM WRITING (PROTECT DISC)
You can protect a DVD-RAM/DVD-RW (VR-mode) disc in order to prevent recorded images from
being erased or edited by mistake. Further recording will not be possible on protected disc until the
protection is released.
1 Press the DISC NAVIGATION button.
2 Press the MENU button.
3 Use the 2/1/0/// buttons to
choose “Protect Disc” on the “Disc” menu
screen, and then press the button.
4 The screen for verifying protection will
appear:
Choose “YES”, and then press the
button.
Choose “NO” to cancel protection.
After “YES” or “NO” setting, the Disc
Navigation screen will be restored.
Note:
• To release disc protection, perform the same
procedure as above: The screen for verifying the
release of protection will appear.
Choose “YES” to release the protection.
• If disc protection has been engaged on another
device, it may not be releasable on this DVD video
camera/recorder: Use the original device that
protected the disc to release the protection.
VERIFYING REMAINING FREE SPACE ON DISC OR CARD (CAPACITY)
You can find out how long you will be able to record on one side of disc or on card.
1 Press the DISC NAVIGATION button.
2 Press the MENU button.
3 Use the 2/1/0/// buttons to
choose “Capacity” on the “Disc” or “Card”
menu screen, and then press the button.
4 Press the button to quit.
The Disc Navigation screen will be restored.
Note:
With a write-protected disc or locked card, the
remaining space will always be displayed as “0”.
*1 With DVD-RW (VF-mode)/DVD-R disc: The quality
mode first used for recording with disc will appear.
*2 With DVD-RW/DVD-R/+RW disc: This will not be
displayed.
Capacity
Capacity : 90%
Approx.
V IDEO( XTRA): 17
m
in
V IDEO( F I NE) : 26
m
in
V IDEO( STD) : 54
m
in
PHOTO :996
RETURN
Capacity
Capacity : 96%
Approx.
PHOTO(FINE) :462
PHOTO( NORM) :924
PHOTO( ECO) : 1848
RETURN
(When using disc)
*1
*2
(When using card)