Filter
Top Products
22
6. SPECIAL SET
1) REMOTE: Remote control baud rate setting
For baud rate setting, use the L and R buttons.
(Note) When setting a baud rate, do not connect the communication cable with the REMOTE terminal.
62500bps 19200bps9600bps4800bps
LL
RR
• 62500bps: Select this baud rate when using the RC-C10 remote control box. In this case, be sure to also set
the RC-C10 baud rate to 62500 bps. Refer to the RC-C10 operating instructions.
• 19200bps, 9600bps, 4800bps: Select any one of these baud rates when controlling the camera from a
personal computer through RS-232C interfacing. For details, refer to 'Function Selection by Internal Switch
Setting'. Contact us for details of the control procedure using a personal computer. Technical documents
including protocol data will be supplied.
2) LENS: Change to LENS menu.
3) IRIS GATE: Change to IRIS GATE menu.
4) WHITE GATE: Change to WHITE GATE menu.
5) LEVEL: Change to LEVEL menu.
6) MASKING: Change to Masking menu.
7) OUTPUT/SYNC: Change to OUTPUT/SYNC menu.
8) ID/TITLE: Change to ID/TITLE menu.
9) DTL: Change to DTL menu.
10) GAMMA: Change to GAMMA menu.