Filter
Top Products
26
3) R GAIN: R gain level setting
The allowable setting range is -128 to 127.
Pressing the R button increases a numeric value to make the R video signal gain higher. Pressing the L button
decreases a numeric value to lower the R video signal gain. For 0 (zero) setting, hold down both the L and R
buttons for approx. two seconds.
4) B GAIN:B gain level setting
The allowable setting range is -128 to 127.
Pressing the R button increases a numeric value to make the B video signal gain higher. Pressing the L button
decreases a numeric value to lower the B video signal gain. For 0 (zero) setting, hold down both the L and R
buttons for approx. two seconds.
(Note) CAM MODE: In case of AUTO, numeric values of R BLK, B BLK, R GAIN and B GAIN become
ineffective.
WHITE BAL: In case of AUTO, numeric values of R GAIN and B GAIN become ineffective.
5) INITIALIZE
Red and blue gain and Red and blue black settings are initialized for each application. Simultaneously press the
L and R buttons for about 2 seconds to return the selected files to the factory settings. See Page 25 for the
factory settings of each application file.
11. MASKING
Menu for setting the masking.
1) R HUE: Change red color phase
2) Y HUE: Change yellow color phase
3) G HUE: Change green color phase
4) C HUE: Change cyan color phase
5) B HUE: Change blue color phase
6) M HUE: Change magenta color phase
The above items can be set in the range of -32 to +31. Respectively
press the R button to increase and the L button to decrease the vector
color hue as indicated in the figure. Each item can be set to 0 by simultaneously pressing the L and R buttons for
about 2 seconds.
7) R SAT: Increase red color level
8) Y SAT: Increase yellow color level
9) G SAT: Increase green color level
10) C SAT: Increase cyan color level
11) B SAT: Increase blue color level
12) M SAT: Increase magenta color level
The above items can be set in the range of -32 to +31. Respectively press the R button to increase and the L
button to decrease the color level. Each item can be set to 0 by simultaneously pressing the L and R buttons for
about 2 seconds.
Y
R
M
B
C
G
+
-
+
+
+
+
+
-
-
-
-
-