Hitachi VM-3700A Camcorder User Manual


 
TROUBLESHOOTING
74
PLAYBACK OF PRE-RECORDED CASSETTE
Symptom Check Point & Correction
"PLAY" button cannot be engaged. Set the "POWER" switch to
"VIDEO" position.
No picture appears on television screen when Set the television to the "PLAY" is
pressed. camera/recorder channel
(3 or 4) depending upon the
selected channel on RF
channel select switch..
(TV is connected to the camera/recorder by using RFof converter unit.)
Interference on playback picture. Adjust the tracking using
"TRACKING" control
(power zoom switch).
When you see the playback
picture on your TV,
adjust fine tuning knob on
television set to obtain
best picture.
The pre-recorded tape is EP
or LP recording.
This camera/recorder is for
use in SP recording only.
Picture bends at the top of the TV screen. TV receiver is older type. It
needs to be modified to work
properly with camera/recorder.
Tape is damaged. Try another
cassette.
Color of your TV screen is too bright, too faint or TV set has VIR circuit. Turn
change. off during playback.
 CLEANING THE INSIDE OF THE ELECTRONIC VIEWFINDER
If dust or foreign matter adheres inside the viewfinder, clean it by using the following
procedure.