Filter
Top Products
t++,_ ++t+_ + ,: . +++ _+_
+, ++_++ • _ ++_+++3+/++ +
+-++.iy ?
++,+;++Ou_m+?++++,,,_+ _++-+_
1. Plug the AC adaptor/charger power cord into AC electrical outlet.
2. Connect one end of the DC cord (provided) to the "DC IN 9.6V" jack of the camcorder.
Connect the other end of the DC cord to the "DC OUTPUT" of the AC adaptor/charger.
NOTES:
• The AC adaptor/charger cannot charge the battery and operate the Camcorder at the same time. 1
_When using the AC adaptor/charger to power the Camcorder, the battery level indicator may display 1
.This indicator is Used f0r battery Operation and has no meaning when Using the AC adaptor/charger to
I power the Camcorder.
8WHEN USING WITH THE CAR BATTERY (By using optional car battery cord Hitachi VM-CC7OA)
_+J+_tm++++pc 0++++_+b#p+i++++++)
1 Connect the small plug of the car battery cord to the "DC IN 9.6V" jack of the camcorder
2. Connect the other end of the car battery cord to the car's cigarette lighter socket.
NOTES:
]
,,The Car battery Cord is designed t° be used only wit h automobiles having a !2_volt negative ground syste m.
I ° To prevent fire or shock hazard or damage to your camcorder, please use only the specified car battery cord.
When the" i "indication appears in the viewfinder and flashes while the camcorder is being operated with a
battery (provided), it indicates that the battery charge is low Charge it or replace it with a charged battery.
Press the "DISPLAY" button. The remaining battery power level will appear in the viewfinder
When the battery is fully charged,"/:+ "is displayed. After several minutes, the symbol will change to" ".
When the battery is very near empty, the symbol will change to" I" and start blinking. You should find an
alternative power source or recharge the battery before continuing to use your camcorder.
L ................ I ..............