Hitachi VM-E625LA Camcorder User Manual


 
Basic Techniques - 27 -
Using Forward and Reverse Search
When looking for a particular point in your videotape use the F.F button and REW button to find the spot quickly.
• Press F.F button during playback to play the tape forward at approximately 9 times normal speed. Press PLAY
button to return to normal playback.
• Press REW button during playback to play the tape backwards at approximately 7 times normal speed. Press
PLAY button to return to normal playback.
Note: When you engage F.F button or REW button the picture will have some interference or noise. This is
normal during search mode.
Playing Back Your Recording on Your TV
Depending on the setup of your video equipment, you connect the camcorder in one of the 3 methods explained
below.
Connecting to a Television with a VCR Attached
1. Connect the provided AV stereo output cable to the AUDIO IN and VIDEO IN jacks of your VCR. Connect
either the right or left audio plug into your VCR if it has only one AUDIO IN jack.
Note: If your VCR has two (stereo) AUDIO IN jacks, connect the audio plug to the left-channel AUDIO IN
jack.
2. Connect the free square plug to the AV IN/OUT jack of the camcorder.
3. Insert a previously recorded cassette into the camcorder.
4. Turn on your VCR and place it in the camcorder input mode (consult your VCR manual for details). Operate the