Filter
Top Products
Advanced Techniques - 30 -
Note: The camcorder records the same date when;
- the cassette is replaced.
- you select AUTO and date display again.
- the recording is less than 10 seconds long.
Note: If the date changes while recording continues over 10 seconds, the new date is recorded for about 10
seconds the next time you make a recording.
TITLE and Date - Automatic Title and Date Recording
This option records the date and created title (see "Creating and Recording a Title" on p46) automatically once a
day at the beginning of recording for 10 seconds.
Note: When TITLE is displayed in the viewfinder or LCD monitor, the title cannot be turned on or off using
the remote control.
Date - Date Recording
The camcorder records the date with the picture all the time.
No Display - No Date Recording
The camcorder does not record the date.
Date and Time - Date and Time Recording
The camcorder records the date and time with the picture all the time.
3. Press the start/stop button. Recording will start.
Note: When AUTO and date display is selected, the date disappears about 10 seconds after recording is
started.
Note: When TITLE and date display is selected, the title and date disappear about 10 seconds after
recording is started.
Using the Power Zoom
The power zoom W control widens the picture, moving the subject farther away, while the power zoom T control
brings the subject closer, narrowing the picture. If ZOOM appears at the left of the viewfinder or LCD monitor, the
digital zoom function shown below has been engaged.