Filter
Top Products
-11 -
5. On Screen Display
<Fig5-1. OSD Information Display>
5.1 Understanding the On-Screen Display
a. Press MENU briefly to confirm the current operation setup.
The information (see Fig 5-1) will disappear after five seconds
if there is no button action.
b. When it zoom in or out pressing UP or DOWN key,
whole OSD Information will appear and then disappear.
Press (+) , (-) button, only upper part of OSD Information
( for displaying camera mode ) will appear and then disappear.
(It is for checking current whole camera mode and zoom position )
c. Even though the OSD message disappears the Camera ID
or Title will continue to display. If you do not wish to display the ID,
you can change the display position. (see 5.11)
Options are: Bottom Right, Top Left, Top Right, Non display.
* If you do not need to display the Operating OSD (for example,
for an external text overlay board), it can be set to OFF at all times
through a remote control using RS232C or RS485 connection.
<Table5-1. Operating OSD description>
④ ⑥
①
②, ③ ②, ③
②, ③
⑤
Manual modeMWB
WB MODE
Zoom WIDEDx1.0 << WIDE
Zoom TELEDx2.5 >>TELEZOOM
DISPLAY
①
Fluorescent (4200°K)FRS
User modeUSR
One Push modeAWC
1/500001/50000
1/10000
1/10000
1/40001/4000
1/20001/2000
1/10001/1000
1/5001/500
1/2501/250
Outdoor preset (5400°K)OUT
NTSC:1/120, PAL:1/100FL
Auto Trace White BalanceATW
⑥
Indoor Preset (3200°K)IN
DESCRIPTIONOSD FormatFUNCTION
NTSC:1/60, PAL :1/501/60 (1/50)Shutter
Speed
⑤
Back Light ONBL
Back Light OFFNon displayBack Light
④
See 5.11 ■■…■■TITLE
③
ID : 0None displayCAMERA ID
②
ID : 1 ~ 255ID : 002
1/20000
1/20000