Filter
Top Products
Rev 2 16 G-113079-002
02/07
English
Sync Control Setup
To synchronize the vertical interval sync pulse of your
camera with other equipment to reduce the effect of picture
roll on the monitor.
Figure 14 Sync Control Setup
Exit Setup Menu
To exit the SETUP menu.
Figure 15 Exit Menu
Menu Item Description
INTERNAL When line lock is not required.
LINELOCK Adjust the proper phase:
V.PH: 000 to 300 (factory default is 0)
Note Line lock is not available in 12 VDC power.
AUTO Camera automatically detects synchronization.
RETURN Press MENU to return to the SETUP MENU.
Menu Item Description
SAVE AND EXIT Press MENU to save your changes and exit.
EXIT Press MENU to quit without saving your
changes.
RETURN Press MENU to return to the SETUP MENU.
<SYNC. CONTROL>
SYNC MODE: LINELOCK
V.PH 000
STEP=10
RETURN
<EXIT MENU>
SAVE AND EXIT
EXIT
RETURN