Honeywell HD4DX Security Camera User Manual


 
Document 800-00023 Rev D 17
05/07
SETUP Menu
Menu Item Option Description
LENS DC!
VIDEO
MANUAL
Selects Lens type. Only DC mode is supported at this time.
Caution Selecting VIDEO or MANUAL adversely affects camera operation.
SHUTTER FLK
MANUAL
!
ESC!
Adjusts shutter settings.
FLK (Flickerless) reduces on-screen flickering.
MANUAL adjusts the shutter speed from 1/60-1/120,000 of a second (NTSC)
or 1/50-120,000 of a second (PAL). Not available in DC lens mode.
ESC (Electronic Shutter Control) adjusts the brightness level on screen. Not
available in DC lens mode.
WHITE BAL
(White Balance)
ATW
MANUAL
!
AWC!
Controls color on the screen.
Select ATW (Auto Tracing White Balance) when the color temp is 2400°K -
12000°K; for example, under a fluorescent light, or outdoors.
MANUAL mode allows you to increase or decrease the red or blue factor on
the screen.
AWC (Auto White Balance Control) automatically adjusts the white balance to
your specific environment.
BACKLIGHT OFF
LOW
MIDDLE
HIGH
Provides light level control to overcome severe backlighting conditions.
AGC OFF
LOW
!
MIDDLE!
HIGH!
Adjusts value of AGC (Automatic Gain Control). Increase the GAIN level to
brighten the picture (noise/distortion may develop).
DNR (Digital
Noise Reduction)
OFF
LOW
MIDDLE
HIGH
Reduces noise/distortion on the screen. Increasing the DNR level reduces
noise but may introduce video artifacts. DNR is deactivated if AGC is turned
off.
SENS-UP
(Sensitivity Up)
OFF
AUTO
!
Automatically provides a clear image under low-light conditions. You can
control the maximum low-light magnification from 2x to 128x. Increasing
magnification may cause noise/distortion.
EXIT Exits the SETUP menu and returns to video monitoring.