Filter
Top Products
15
SCANNER OPERATION
Configurable Button Functions
SECONDARY SCAN PATTERN
B
UTTON HOLD MODE WITH CODEGATE ENABLED
For illustration purposes the unit’s primary scan pattern has been set to
all scan lines (omnidirectional reading) and the secondary pattern has
been set to single-line (menu reading) with a 10 second button click
timeout configured.
1. The primary scan pattern is active when the
scanner starts.
2. To activate the secondary scan pattern,
press and hold the button.
3. To scan the bar code, align the laser line
over the bar code while continuing to hold
down the button.
4. To transmit the bar code, release the
button. The scanner will beep once.
5. To scan and transmit additional bar codes,
repeat steps 2 through 4.
6. The primary scan pattern will automatically
reactivate after the button is released and no
bar code is present in the scan field.