Filter
Top Products
2
0
ra
Item IM-3
Hardware Reference
2.1 MAVIS IM-30/IM-10
2.1.1 Came Specification
0 IM-100
Image sensor
1/2” CMOS S 3, Pi
ensor Micron MT9V40 xel size: 9.9um x 9.9um
Video output p
0(V)
ixels
640(H) x 48
Gain control
0 ~ 1 nic
2dB setting via commu ation command
Power supply
+1 via
2VDC normal (Supply 1394 cable)
Power consum
12
ption
Max. ~ 1.7W at V
Acquisition m
(expo ble ), External random trigger
ode
Free Run
sure time programma
Connector Inte
6-Pin or v
0-Pin G ose Inpu
rface
1
IEEE 1394 connector(f
PIO (General Purp
ideo and power)
t/Output)connector
GPIO connecto
TL level tput and
r
T
with 2 input, 4 ou one +5VDC output
Video mode
Initial mode: 6
40 x 480 at 30fps Initial mode: 640 x 480 at 100fps
Scalable mode: by AOI Scalable mode: by AOI
Protocol
IEEE 1394a
version. 1.31 (transfer speed 400Mbps)
Test image
Gray value internal test pattern generated
Exposure Time
Programmable via IEEE 1394 bus
Brightness
Programmable via IEEE 1394 bus
Temperature
Operating temperature : 0℃ ~ 50℃ (32℉ ~ 122℉)
Storage temperature: -20℃ ~ 60℃ (-4℉ ~ 140℉)
Humidity
Operating humidity : 20% ~ 80%, relative, non-condensing
Storage humidity: 10% ~ 90%, relative, non-condensing
EMC condition
CE/FCC
Dimension
72.5mm (H) x 49mm(W) x 36.7mm(D) without Lens
Weight
120g without Lens
Lens Adaptor
C/CS Mount
- 21 -